Multiquip P33/24 HHMR operation manual Troubleshooting table

Page 38

Maintenance:

11.0 Troubleshooting table

Fault:	Possible cause:		Remedy:
Engine running, machine does not	Insufﬁcient hydraulic oil in the	• Check hydraulic oil level
move!	tank.	•	Check the hydraulic system for
		leaks

Engine running, machine can only	Safety bar in engaged position	• Pull safety bar out of engaged
be driven forwards!			position.
		• Only engage safety bar during
			transport, not in the work
			mode

Image 38

Contents Vibratory Trench Roller P33/24 Hhmr Page Foreword 12345 Table of Contents Operation with remote control Jump start device Loading and transport Maintenance850 mm 1200 mm 630 mm 1520 mm 500 mm 855 mm 1780 mm Main dimensions RW 1504 /HF/HK/FK/HFKSteering Noise and vibration speciﬁcations Rammax RWModiﬁcations to the machine DescriptionFields of application Safety regulations Intended use Operation of the machineStarting the machine Safety signs attached to the machineLoading the machine for transport Driving the machine Parking on uphill and downhill slopes Maintenance workRefuelling Work on hydraulic linesRepairs Display and operating elements Cockpit TransmitterDescription of the display and operating elements ÖK Oil pressure warning lightSZ Hourmeter Address setting Back-up safety barEngine safety support Operation Operation with remote controlPrecommissioning checks Zone BStarting the engine Driving with vibration Switching on and reversing the direction of travelDriving at high speed Starting process Switching off the machineManual control Travel operationVibration Jump start device FSE Loading and transportRunning in regulations MaintenanceGeneral remarks on maintenance and maintenance work Maintenance schedule Every dayChecking the fuel level Check engine oil levelChecking the hydraulic oil level Battery Changing the fuel ﬁlterChecking / cleaning / replacing the air ﬁlter Changing the transmission oil12.1Hydraulic system Changing the engine oilHydraulic oil change High-pressure line ﬁlter Adjusting the stripper Changing the suction ﬁlterTightening torques for bolts with standard metric thread Bolt size Tightening torques NmTroubleshooting table Heres HOW to GET Help