Multiquip P33/24 HHMR operation manual SZ Hourmeter

Page 21

Display and operating elements:

SZ: Hourmeter

The hourmeter counts the number of operation hours with the ignition switched on. The maintenance work must be carried out according to the displayed operating hours.

FR: Travel lever for drums, right

Position „0“	= Zero position for engine start
Position „Front“	=	Forward travel!
Position „Back“	=	Reverse travel!
FL: Travel lever for drums, left
Position „0“	= Zero position for engine start
Position „Front“	=	Forward travel!
Position „Back“	=	Reverse travel!

Remark:

The position of the two travel levers FR and FL relative to one another determines the direction of travel: straight on, left-hand curve, right-hand curve or turning around the vertical axis (rotating on the spot, see diagram).

08

09

21

Image 21

Contents Vibratory Trench Roller P33/24 Hhmr Page Foreword 12345 Table of Contents Jump start device Loading and transport Maintenance Operation with remote control850 mm 1200 mm 630 mm 1520 mm 500 mm 855 mm 1780 mm RW 1504 /HF/HK/FK/HFK Main dimensionsSteering Rammax RW Noise and vibration speciﬁcationsDescription Fields of applicationModiﬁcations to the machine Safety regulations Operation of the machine Intended useSafety signs attached to the machine Loading the machine for transportStarting the machine Driving the machine Refuelling Maintenance workParking on uphill and downhill slopes Work on hydraulic linesRepairs Cockpit Transmitter Display and operating elementsÖK Oil pressure warning light Description of the display and operating elementsSZ Hourmeter Back-up safety bar Engine safety supportAddress setting Precommissioning checks Operation with remote controlOperation Zone BStarting the engine Switching on and reversing the direction of travel Driving at high speedDriving with vibration Manual control Switching off the machineStarting process Travel operationVibration Loading and transport Jump start device FSEMaintenance General remarks on maintenance and maintenance workRunning in regulations Every day Maintenance scheduleCheck engine oil level Checking the hydraulic oil levelChecking the fuel level Changing the fuel ﬁlter BatteryChanging the transmission oil Checking / cleaning / replacing the air ﬁlterChanging the engine oil Hydraulic oil change12.1Hydraulic system High-pressure line ﬁlter Changing the suction ﬁlter Adjusting the stripperBolt size Tightening torques Nm Tightening torques for bolts with standard metric threadTroubleshooting table Heres HOW to GET Help