Multiquip P33/24 HHMR operation manual 12345

Page 4

Foreword:

On transfer of the machine, please complete:

----------------------------------------------------------------

Machine model (Fig. 3)

----------------------------------------------------------------

Serial number (Fig. 1)

----------------------------------------------------------------

Engine type

----------------------------------------------------------------

Engine number (Fig. 2)

Attention:

01

12345

On machine acceptance, you will receive instruction in the operation and maintenance of the machine by one of our staff or by an authorised dealer. It is vital that you pay particular attention to the instructions relating to safety aspects and hazards which can arise at the machine.

 

02

 

 

 

 

03

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:

In the event that the engine number on the sticker is no longer legible due to soiling or damage, this number can also be found on the engine block. The location of the embossed engine number on the engine block can be seen from the Hatz operating and maintenance instructions.

4

Image 4
Contents Vibratory Trench Roller P33/24 Hhmr Page Foreword 12345 Table of Contents Operation with remote control Jump start device Loading and transport Maintenance850 mm 1200 mm 630 mm 1520 mm 500 mm 855 mm 1780 mm Main dimensions RW 1504 /HF/HK/FK/HFKSteering Noise and vibration specifications Rammax RWFields of application DescriptionModifications to the machine Safety regulations Intended use Operation of the machineLoading the machine for transport Safety signs attached to the machineStarting the machine Driving the machine Maintenance work RefuellingParking on uphill and downhill slopes Work on hydraulic linesRepairs Display and operating elements Cockpit TransmitterDescription of the display and operating elements ÖK Oil pressure warning lightSZ Hourmeter Engine safety support Back-up safety barAddress setting Operation with remote control Precommissioning checksOperation Zone BStarting the engine Driving at high speed Switching on and reversing the direction of travelDriving with vibration Switching off the machine Manual controlStarting process Travel operationVibration Jump start device FSE Loading and transportGeneral remarks on maintenance and maintenance work MaintenanceRunning in regulations Maintenance schedule Every dayChecking the hydraulic oil level Check engine oil levelChecking the fuel level Battery Changing the fuel filterChecking / cleaning / replacing the air filter Changing the transmission oilHydraulic oil change Changing the engine oil12.1Hydraulic system High-pressure line filter Adjusting the stripper Changing the suction filterTightening torques for bolts with standard metric thread Bolt size Tightening torques NmTroubleshooting table Heres HOW to GET Help