Specifications:
1.2Noise and vibration specifications
The noise and vibration specifications listed below in accordance with the EC Machine Directive in the draft (93/68/EEC) were determined under operating conditions typical for the machinery in question with vibration over a specified travel surface (DIN 45635).
In operational application, deviating values may result depending on the prevailing operating conditions.
Noise specification
The noise emission specifi cation stipulated in accordance with Annex 1, Section 1.7.4.f of the EC Machine Directive is as follows:
-Sound pressure level at the operator position:
-Sound power level:
LpA = 86.9 dB(A)
LWA = 102.7 dB(A)
These noise emission values were determined in accordance with ISO 6081 for the sound pressure level (LpA) and ISO 3744, DIN 45635, for the sound power level (LWA).
Vibration specification
The vibration specifi cations stipulated in accordance with Annex 1, Section 2.2 / 3.6.3. a of the EC Machine Directive are as follows:
The weighted effective acceleration value, determined in accordance with ISO 8662 Part 1, DIN 45675, Part 9, is approx. 10.3 m/sec˛.
Technical modifi cations reserved
Rammax RW 1504
11