Weider 831.159290 user manual Questions?

Page 36

Model No. 831.159290

QUESTIONS?

If you find that:

you need help assembling or operating the WEIDER® PRO 9735 Home Gym System

a part is missing

or you need to schedule repair service

call our toll-free HELPLINE

1-800-736-6879

Monday–Saturday, 7 am–7 pm Central Time (excluding holidays)

REPLACEMENT

PARTS

If parts become worn and need to be replaced, call the following toll- free number

1-800-FON-PART (1-800-366-7278)

Part No. 155073 J00763-C R0499A

The model number and serial number of your WEIDER® PRO 9735 Home Gym System are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.

All replacement parts are available for immediate purchase or special order when you visit your nearest SEARS Service Center. To request service or to order parts by telephone, call the toll-free numbers listed at the left.

When requesting help or service, or ordering parts, please be pre- pared to provide the following information:

The MODEL NUMBER of the product (831.159290).

The NAME of the product (WEIDER® PRO 9735 Home Gym System).

The KEY NUMBER and DESCRIPTION of the PART (see the PART LIST/EXPLODED DRAWING at the center of this manual).

SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179

Printed in Canada © 1999 Sears, Roebuck and Co.

Image 36
Contents Patent Pending Model No Serial No SEARS, Roebuck and CO., Hoffman ESTATES, ILTable of Contents Full 90 DAY WarrantyImportant Precautions Dimensions Before YOU BeginAssembly Following Tools not Included are Required for AssemblyFrame ASSEMBLY-PLASTIC LocknutsNylon Locknuts Do not fully tighten the Nylon LocknutsGrooves are on the indicated side of each Stack of Weights Fully tighten the Nylon LocknutsLocknut 40. Do not overtighten the Nylon Weight Tubes are in the pin grooves in the upper Weights Nylon Locknuts yet ARM Assembly ARM Assembly ARM Assembly Find the Butterfly Cable 85-this is Trap must be oriented as shown and bePositioned to hold the Cable in the groove Pulley End with Two holes Should be Down Cable Assembly Post Wide Tabs Must be On this Side Cable Assembly Cable Assembly Cable must be routed from the direction shown Find the Press Cable 88. Attach the end Plates 31. The Cable must be routed from Cable Trap is turned to hold the Cable PlaceLocknut until step Cable Assembly Seat Assembly Seat AssemblySeat Assembly High Pulley HOW to USE the Home GYM System Changing the Weight SettingAdjusting the LEG Lever Adjusting the LEG Press PlateAttaching the AB Strap to the AB Pulley Station Weight Resistance Chart PlatesTROUBLE-SHOOTING and Maintenance Tightening the CablesCable Diagrams Press Cable High Cable Long U Bracket Leg Press-13Butterfly Cable Left Arm Right Arm Page Page X 3 1/4 Bolt Part LIST-Model No Qty DescriptionExploded DRAWING-Model No R0499AQUESTIONS?