Weider 831.159290 user manual Cable must be routed from the direction shown

CABLE ASSEMBLY

42.Wrap the Low Cable (89) around a 3 1/2” Pulley (82). Attach the Pulley to the indicated bracket on the Top Frame (2) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42). The

Cable must be routed from the direction shown.

43.See the inset drawing. Attach a 3 1/2” Pulley (82) and a Cable Trap (80) to the upper hole in the Large “U” Bracket (84) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42). Be sure that the Cable Trap is inside the Large “U” Bracket. Note: This may come pre-assembled.

Route the Low Cable (89) through the Large “U” Bracket (84) and the 3 1/2” Pulley (82).

Be sure that the Cable is in the groove of the Pulley and that the Cable and Pulley move smoothly.

44.Wrap the Low Cable (89) around a 3 1/2” Pulley (82). Attach the Pulley to the Top Frame (2) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42). The Cable must be routed from the direction shown.

42
	2
		42
	50	82
		89
43
89		89
80	82
42	50
84		82
		84
44		42
	2
		50
		82
		89

19