Weider 831.15393 user manual 87 r13

24.Remove the preettached 3 1/2" Pulleys (78) from the Offset Double "U"-bracket(61).

Wrap the Swivel Cable (17) around a 3 1/2" Pulley (78). Attach the Pulley to the Offset Double "U"- bracket (61) with a 3/6" x 1 3/4" Bolt (93) and a 3/8" Nylon Locknut (87).

25.Wrap the Swivel Cable (17) around a 3 112"Pulley (78). Attach the Pulley and a Cable Trap (68) to the next to bottom hole in the Small Pulley Plates (31) with a 3/8" x 2" Bolt (100) and a 318"Nylon Locknut (87). Make sure the Cable Trap Is turned to hold the Cable In the groove of the Pulley.

26.Wrap the Swivel Cable (17) around a 3 1/2" Pulley

(78). Attach the Pulley and a Cable Trap (68) to the bracket on the Swivel Upright (5) with a 3/8" x 2" Bolt (100) and a 3/8" Nylon Locknut (87). Make sure the Cable Trap is turned to hold the Cable In the groove of the Pulley.

24

61

25

26

27.Attach the end of the Swivel Cable (17) to the bracket on the Swivel Carriage (46) with a 3/8" x 1" Bolt (13) and a 3/8" Nylon Locknut (87).

27

87_r_13 _17

28. Locate the Let Cable (88), which Is 89 1/4" long	28
and has a ball on one end and an eyelet on the
other. Route the eyelet end of the Cable up through
the ButterflyTop Frame (7) and arounda 3 1/2"
Pulley (78). Attach the Pulley insideof the Butterfly
Top Frame with a 3/8" x 2 3/4" Bolt (101), two 3/8"
Washers (91), two 1/2" Spacers (89), and a 3/8"
Nylon Locknut(87).

13