44.Wrap the Swivel Low Cable (72) over a 3 1/2" Pulley (78). Attach the Pulley to the Offset Double "U"- bracket (61) with a 3/8" x 1 3/4" Bolt (93) and a 3/8"
Nylon Locknut (87).
45.Wrap the Swivel Low Cable (72) under a 3 1/2" Pulley (78). Attach the Pulley to the indicatedbrack- et on the Long Base (120) with a 3/8" x 1 314"Bolt
(93)and a 318"Nylon Locknut(87),
46.Route the Swivel Low Cable (72) under the indicat- ed stack of Weights (44).
Wrap the Swivel Low Cable (72) under a 3 1/2" Pulley (78). Attach the Pulley to the indicated brack- et on the Long Base (120) with a 318"x 1 3/4" Bolt
(93)and a 3/8" Nylon Locknut (87).
47.Wrap the Swivel Low Cable (72) over a 3 1/2" Pulley (78). Attach the Pulley and a Cable Trap (68) between the indicated holes in the Pulley Plates
(63)with a 318"x 2" Bolt (100) and a 3/8" Nylon
Locknut (87). Make sure that the Cable Trap Is turned to hold the Cable In the groove of the Pulley.
44
45
f
120
120
J
47
48.Wrap the Swivel Low Cable (72) under a 3 1/2" Pulley (78). Attach the Pulley to the indicated brack- et on the Short Base (2) with a 3/8" x 1 3/4" Bolt (93) and a 3/8" Nylon Locknut (87).
o/
48
A
93
17