57.Attach the Seat (16) to the Seat Frame (8) with two 114"x 3/4" Screws (114), a 1/4" x 2 1/2" Screw (99), and a 1/4" Washer (97).
58.Attach the Butterfly Backrest (15) to the Butterfly Updght (3) with four 1/4" x 3/4" Screws (114).
59.Wet one end of the Squat Arm (32) with soapy
water. Slide a Short Pad (20) onto the Squat Arm as shown.
Slide two Nut Clips (108) onto a Squat Handle (33).
Attach the Squat Handle to the Squat Arm (32) with two 5/16" x 3/4" Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and press it ontothe end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8" Handgrip (84) onto the Squat Handle.
Repeat this step with the other end of the Squat Arm (32).
60.Attach the Squat Arm (32) to the Squat Bracket (37) with two 3/8" x 2 1/2" Carriage Bolts (106), two 3/8" Washers (91), and two 3/8" Nylon Locknuts (87).
Do not tighten the Nylon Locknuts yet.
Finish attaching the Squat Arm (32) to the Squat Bracket (37) with a 3/8" x 3" Bolt (107), a 3/8"
Washer (91), and a 3/8" Nylon Locknut (87).
Tighten all of the 3/8" Nylon Locknuts (87) used
In this step.
57
58114
,114
59
2O
51
111
84
60107
87,_=e 91 32
8737
2O