Whirlpool YGS395LEG To delay the start using delay start time, Example for 41⁄2-hour cycle

USING THE SELF-CLEANING CYCLE

SETTING THE CONTROLS (CONT.)

To delay the start using delay start time:

1. Press AUTO CLEAN. PRESS YOU SEE

This will automatically set a 31⁄2-hour Self- Cleaning cycle.

NOTE: There will be a 30-minute cool-down

1⁄2 hour before the cycle is over.

AUTO

CLEAN

CLEAN TIME

2.Set the cleaning time (optional).

If you want a Self-Cleaning cycle longer or shorter than 31⁄2 hours, use the Hour and Minute pads to set the cleaning time you want. Press the “up” (s) or “down” (t) pad(s) until a time between 21⁄2-41⁄2hours shows on the display.

•Use 21⁄2 hours for light soil.

•Use 31⁄2-41⁄2hours for average to heavy soil.

PRESS YOU SEE

HR MIN

CLEAN

TIME

(example for 41⁄2-hour cycle)

3. Press DELAY START TIME. PRESS YOU SEE

DELAY

START

TIME

CLEAN

STARTTIME

4.Set the start time.

Press the “up” (s) or “down” (t) pad(s) until the correct time shows on the display. The oven will automatically come up with the stop time by adding the set cleaning time to the set start time.

PRESS YOU SEE

HR MIN

CLEAN

STARTTIME

(example for 2:30 start time)

5. Press START/ENTER.		PRESS	YOU SEE
	The door will lock as soon as you press	START
	START/ENTER.
		ENTER		ON
		5 SEC	DELAY		CLEAN
6. After the Self-Cleaning cycle starts:			YOU SEE
			HEAT	ON	LOCKED CLEAN
			TIMED		TIME

7. After the Self-Cleaning cycle ends:	YOU SEE
LOCKED goes off and the door unlocks.
NOTE: The stop time will be the start time plus
the cleaning time.

CLEAN

26