Water Inlet Hoses, Vacation, Storage and Moving Care

Water Inlet Hoses

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

Vacation, Storage and Moving Care

Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer. If storing or moving your washer during freezing weather, winterize it.

Non-use or vacation care:

Operate your washer only when you are at home. If you will be on vacation or not using your washer for an extended period of time, you should:

■Unplug washer or disconnect power.

■Turn off the water supply to the washer. This helps avoid accidental flooding (due to a water pressure surge) while you are away.

To winterize washer:

1.Shut off both water faucets.

2.Disconnect and drain water inlet hoses.

3.Put 1 qt (1 L) of R.V.-type antifreeze in the basket.

4.Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

5.Unplug washer or disconnect power.

To use washer again:

1.Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug in washer or reconnect power.

3.Run the washer through the Bulky/Bedding cycle without clothes, using ½ the normal recommended amount of detergent to clean out the antifreeze.

To transport the washer:

1.Shut off both water faucets.

2.Disconnect and drain water inlet hoses.

3.If the washer will be moved during freezing weather, put 1 qt (1 L) of R.V.-type antifreeze in the basket. Run washer on the Rinse & Spin setting for about 30 seconds to mix the antifreeze and remaining water.

4.Disconnect the drain from the drain system.

5.Unplug the power cord.

6.Place the inlet hoses into the basket.

7.Drape the power cord and drain hose over edge into the basket.

8.Place foam packing ring from the original shipping materials in the top of washer. If you do not have the original foam packing ring, place heavy blankets, towels, etc. into basket opening. Close the lid and put a piece of tape over the lid and down to the front of the washer.

Reinstalling the washer

1.Follow the “Installation Instructions” to locate, level and connect the washer.

2.Run the washer through the Bulky/Bedding cycle without clothes, using ½ the normal recommended amount of detergent to clean out the antifreeze, if used.

2707, 2708, 2709, 110.2706 specifications

The Kenmore 110.2706, 2709, 2708, and 2707 washing machines are a part of the brand's well-regarded lineup, known for their reliability and performance. These models cater to a variety of laundry needs, making them popular choices among homeowners.

One of the standout features of these washers is their capacity. With a focus on accommodating larger loads, they enable users to tackle hefty laundry days with ease. This not only translates to fewer cycles but also saves time and energy, making them ideal for busy households or those with larger families.

The Kenmore 110 series is equipped with a range of wash cycles and options, allowing for customization based on fabric type and soil level. From delicate fabrics to heavily soiled work clothes, users can select the appropriate cycle for optimal cleaning results. The inclusion of specialized cycles such as “Heavy Duty” and “Quick Wash” provides flexibility, ensuring that garments receive the care they require.

Technologically, the Kenmore 110.2706 to 2709 models incorporate advanced features like the Dual Action Agitator. This design helps to move clothes efficiently through the water, ensuring a thorough cleaning without causing excess wear and tear on fabrics. Additionally, the Adaptive Wash technology optimizes the wash process by detecting load size and fabric type, adjusting water levels and wash actions accordingly to deliver the best possible results.

Energy efficiency is another key characteristic of these washing machines. Kenmore has designed the 110 series to meet or exceed Energy Star® guidelines, which helps consumers save on utility bills while also being more environmentally friendly. The models utilize modern continuous temperature-control systems to maintain optimal water temperature, which enhances cleaning performance while consuming less energy.

Ease of use is paramount in the design of the Kenmore 110 washers. The intuitive control panel simplifies the selection of settings, while the large, transparent lid provides visibility into the wash cycle. Furthermore, these models often feature a sturdy build designed for durability, ensuring that they can withstand the rigors of regular use over the years.

In summary, the Kenmore 110.2706, 2709, 2708, and 2707 washing machines are equipped with features such as large capacity, multiple wash cycles, advanced agitation technology, and energy efficiency. These characteristics make them an excellent choice for anyone looking to invest in a reliable and effective laundry solution for their home.