If you need assistance or service

Loads are wrinkled

■Was the load removed from the dryer at end of the cycle? Remove load as soon as tumbling stops.

■Was the dryer overloaded?

Dry smaller loads that can tumble freely.

■Did the load overdry?

Check the manufacturer’s care label. Match dryer setting to load type. See “Drying, Cycle, and Temperature Tips.”

Odors

■Have you recently been painting, staining or varnishing in the area where your dryer is located?

If so, ventilate the area. When the odors or fumes are gone from the area, re-wash and dry the clothing.

■If the dryer is electric, is it being used for the first time? The new electric heating element may have an odor. The odor will be gone after the first cycle.

■If the dryer is gas, there may be a gas leak.

Turn off the gas supply line, leave your house, and then call your local gas company.

Garment damage

■Check the following:

Were zippers, snaps, and hooks left open?

Were strings and sashes tied to prevent tangling? Were care label instructions followed?

Were items damaged before drying?

If you still have problems, see the Assistance or Service section.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check the Troubleshooting section. It may save you the cost of a service call. If you still need help, follow these instructions.

If your problem is not due to any of the items listed in the Troubleshooting section, contact the dealer from whom you purchased the dryer, or a designated Whirlpool service company.

When calling, please know the purchase date, and the complete model and serial number of your appliance. This information will help us better respond to your request.

If you need replacement parts

FSP® is a protected trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part. FSP replacement parts will fit right and work right because they are made to the same exacting specifications used to build every new WHIRLPOOL® appliance.

To locate FSP replacement parts in your area, contact the dealer from whom you purchased the dryer, or a designated Whirlpool service company.