Miele PW 6131, PW 6161, PW 6101, PW 6201 Skipping program cycles, Program sequence

Use

Skipping program cycles

Cycles of a program in progress can be skipped or repeated.

^Press the f "End" button to stop the program.

1Hot Wash

Program stop

i ü f

^Press the ü "Skip" button. The display shows the current area, block or step.

See also "Program structure" in the Programming manual .

Skip -> 1 Hot Wash

Program stop

Area 2: Main wash	e
S	A
Area: 2 Main wash
Block 1: Main wash
Step: Wash time 2	-
S	A

^Turn the jog shuttle to "Area" and press it to confirm the selection.

Area: Select either 1 Prewash, 2 Main wash or 3 Rinse and confirm by pressing the jog shuttle.

^Turn the jog shuttle to "Block" and press it to confirm the selection.

Block: Select either Prewash 1-10, Main wash 1-10 or Rinse 1-10 and confirm by pressing the jog shuttle.

^Turn the jog shuttle to "Block" and press it to confirm the selection. Select the desired program step and confirm.

^To start the new program step press S "Save" and h "Start".

To go back without skipping a program cycle

^Press the A "Back" to go back to the program stop.

Program sequence

The program sequence is shown in the display after the start of the program.

1	Hot Wash
104 °F	Pre-wash			68 °F
	Main wash		End at 12:35
+i	m k	m	K	f

The second display line, here Pre-wash, the wash water temperature is shown.

1	Hot Wash
194 °F	Main wash				140 °F
	Rinse 1		Cold	End at 12:35
+i	m	k	m	K	f

If the program block Pre-wash has ended, the 2nd line in the display shows the program block Main wash with the current wash water temperature. The 3rd line shows the following program block, here Rinse 1.

The program end display, above 12:35, shows the time of day when the program will be finished.

18