Miele PW 6101, PW 6161, PW 6131, PW 6201 operating instructions Warm rinse

Page 21

Program Guide Standard Programs

10 Delicates

Synthetics, silk, rayon

Pre-wash selectable

+i

 

 

Main wash 86°F

m

 

 

Wash rhythm "delicate"

k

 

 

2 x Rinse

 

 

 

Final spin 1 Min.

 

11 Woolens

Machine washable woolens,

Main wash limited to 104°F

 

86 °F

sturdy woolens and mixed

Wash rhythm "gentle"

m

 

woolens

2 x Rinse

k

 

 

Final spin 1 Min.

 

 

 

 

 

12 Handwash

Woolens and mixed woolens

Main wash limited to 86°F

m

Woolens

 

Wash rhythm "gentle"

k

86 °F

 

2 x Rinse

 

 

 

Final spin 1 Min.

 

13 Extra

 

 

 

Starch

 

 

 

14 Extra

Laundry which needs to be

Rinse

 

Rinse /

rinsed and spun

Final spin

m

Spin

 

 

k

15 Extra Spin

Laundry which needs to be

Final spin

 

 

spun

 

 

16 Extra

 

Water drain

 

Drain

 

 

 

* Warm rinse

The standard programs 1 Hot Wash 194°F, 2 Cottons 140°F and 3 Cottons Intensive 140°F are programmed to rinse with hot water. If a hot water connection is available, it is favorable to use this.

-The residual moisture of the laundry is lower after spinning.

-The laundry is already warmed.

If the laundry is immediately dried in a dryer or ironed with the rotary iron, time and energy is saved.

To deselect the warm rinse, see the Programming manual.

21

Image 21
Contents Operating Instructions Washer Contents Contents Correct usage of the washer Important Safety InstructionsGrounding Instructions Electrical SafetyUsing accessories UseAdditional information Detergent compartments Guide to the washerControl panel Emergency Stop button Drum door e Door handleOperating panel Operator Card Control keysUse Turn on the washerSort and load the laundry Add detergent Maximum dry laundry weights§ = Front compartment Rear compartmentFabric softener DetergentDosage Water hardnessBleach StarchFabric dye Detergent containerSelect wash options if needed Select a program+ i Block Plus Starch StopAdjust the program if needed Select Delay Start if neededEnd of program Start the programSpin speed Do not use forceCanceling a locked program Canceling a programSkipping program cycles Program sequenceTo go back without skipping a program cycle Information Program end with water in the drumProgram stop Program Fabric Program cycle Program Guide Standard ProgramsWarm rinse Card only operation Washing using the program cardLanguage selection Extra featuresLiquid dispensing system Optional modulesPriming the dispensing pumps Deselect the dispensingDispensing calibration Maintenance of the dispensing systemPeak load cut off PC ConnectionLoad size Cleaning and Care Cleaning the exteriorAfter each use Vent grille Maintenance during downtimeRust Water inlet filtersDrum bearing lubrication PW 6161 and 6201 only Safety mechanism of the door handle is disengaged Frequently asked questionsReasons for oversudsing Drum door cannot be openedDuring a short power failure Power failure Emergency door releaseExtended power failure Draining the wash waterFault messages Display Service intervalCheck the water supply and press h Start After sales service Noise level Guide to the data plate symbolsPage Installation Instructions Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Installation site Installation InstructionsRemoving the shipping struts Connecting the water intake / water drain hoses PlumbingCold water connection only Connecting the dispensing pumps Electrical connectionSteam connection Quick Guide All rights reserved 06 578 520