Guide to the washer
Control keys
^Press once to activate the function, press again to deactivate the function.
iManual operation
(Used by Miele Service Technicians) See the Programming manual.
FC Functions
Press this key to temporarily select another language and/or access the operator level.
A Back to the previous display
+ i Block plus
The respective program block, e.g. prewash, will be added to the program.
mStarch Stop
Press this button to stop the program and allow starch to be added to the laundry.
kSpin Stop
Press this button if a final spin is not required after the final rinse.
mDelay start
Press this key to select a start time in the display.
KInformation
To show program information
fStop/Finish
Press to stop a selected program or to end an already stopped program.
qDrain
üSkip
Cycles of a program in progress can be skipped or repeated.
e/- Following or previous line
SSave
See the Programming manual.
$ Program locked
If a program is locked it cannot be stopped or ended with the
) Program unlocked
ßDispensing
äDispensing not available
\Operating data
To reset the load sensor to "00.0" when the drum is empty and the display shows a load size.
DData transfer
Operator Card
No programs are saved on this card. To transfer the data from the control to the card and vice versa see the Programming manual.
30 programs containing 6 blocks each can be saved on the card.
The rear side of the card can be labeled.
9