Miele PW 6131 Frequently asked questions, Reasons for oversudsing, Drum door cannot be opened

Page 30

Frequently asked questions

Reasons for oversudsing

Detergent type

^Only use detergent formulated for use in commercial washers. Detergents for domestic machines are not suitable.

Too much detergent

^Follow the detergent manufacturer’s instructions and adjust the amount to the local water hardness.

Oversudsing detergent

^Use a low sudsing detergent or contact Miele’s detergent application specialists.

Very soft water

^In areas with soft water, use less detergent.

Soiling level of laundry

^For lightly soiled laundry use less detergent.

Residue, e.g. undissolved detergent on laundry

^Run a prewash without detergent and without selecting a temperature.

^Laundry which has been pre-treated in detergent before washing must be thoroughly rinsed before running a wash program.

Small loads

^Reduce the amount of detergent dispensed accordingly.

Drum speed too high during a wash (Profitronic-controls)

^Reduce the drum speed and wash rhythm.

The drum door cannot be opened

^Press against the door handle, turn the machine on then off and pull on the door handle once more.

The safety mechanism of the door handle is disengaged

The door handle has lost its function. The door cannot be opened or closed.

The safety mechanism is designed to protect the handle from damage, i.e. if too much force is being used in an attempt to open the door.

^Firmly press against the door handle until you hear the safety mechanism click.

The door can now be opened or closed provided there is no water in the machine.

30

Image 30
Contents Operating Instructions Washer Contents Contents Important Safety Instructions Correct usage of the washerElectrical Safety Grounding InstructionsUsing accessories UseAdditional information Control panel Emergency Stop button Guide to the washerDetergent compartments Drum door e Door handleOperating panel Control keys Operator CardUse Turn on the washerSort and load the laundry § = Front compartment Maximum dry laundry weightsAdd detergent Rear compartmentDosage DetergentFabric softener Water hardnessFabric dye StarchBleach Detergent container+ i Block Plus Select a programSelect wash options if needed Starch StopSelect Delay Start if needed Adjust the program if neededSpin speed Start the programEnd of program Do not use forceCanceling a program Canceling a locked programSkipping program cycles Program sequenceTo go back without skipping a program cycle Information Program end with water in the drumProgram stop Program Guide Standard Programs Program Fabric Program cycleWarm rinse Washing using the program card Card only operationExtra features Language selectionPriming the dispensing pumps Optional modulesLiquid dispensing system Deselect the dispensingMaintenance of the dispensing system Dispensing calibrationPeak load cut off PC ConnectionLoad size Cleaning and Care Cleaning the exteriorAfter each use Rust Maintenance during downtimeVent grille Water inlet filtersDrum bearing lubrication PW 6161 and 6201 only Reasons for oversudsing Frequently asked questionsSafety mechanism of the door handle is disengaged Drum door cannot be openedExtended power failure Power failure Emergency door releaseDuring a short power failure Draining the wash waterDisplay Service interval Fault messagesCheck the water supply and press h Start After sales service Guide to the data plate symbols Noise levelPage Installation Instructions Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Installation Instructions Installation siteRemoving the shipping struts Connecting the water intake / water drain hoses PlumbingCold water connection only Connecting the dispensing pumps Electrical connectionSteam connection Quick Guide All rights reserved 06 578 520