Miele T 220 operating instructions Tons or Minimum Iron programme. If the drum is, Programme again

Page 21

 

 

Problem solving guide

 

 

 

 

 

 

 

 

Check and fault indicator lights:

 

 

Problem

Possible cause

 

Remedy

The programme has

This is not a fault. The electronics register whether

stopped, the

there is laundry in the drum after the start of a COT-

Anti-crease/Finish lamp

TONS or MINIMUM IRON programme. If the drum is

has come on in the se-

empty the programme is stopped. The programme

quence display and the

will also be stopped if the laundry is dry when the

buzzer is sounding.

programme is started or if you are trying to dry an in-

 

dividual item. Use the Timed drying programme

 

(Warm air) to dry individual items.

The programme has

There is no obvious

 

– Switch off the dryer.

been interrupted, the in-

cause.

 

– Then switch the dryer

dicator lamp for Hand

 

 

back on and start the

iron or Machine iron is

 

 

programme again.

flashing, and the buzzer

 

 

If the programme stops

sounds.

 

 

 

 

again and an indicator

 

 

 

 

 

 

lamp flashes, there is a

 

 

 

fault. Contact the Miele

 

 

 

Service Department.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operating instructions for vented tumble dryer T Contents Consumption data Technical data Correct use Technical safetyOperation Page Using accessories Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsProgramme selector Control panelProgramme sequence and check lamps Start button Door buttonWash care labels Tips on dryingProgrammes Fabric type Special notes Low temperatureNormal+ NormalMinimum Iron Programme chartSmoothing Hand careWarm air Cool airHow to dry correctly Load the drum Switch on the dryerPrepare the laundry Start the programme Select a programmeAt the end of a programme To cancel a programmeSelecting a different programme Interrupting a programmeCleaning and care Cleaning the fluff filterTumble dryer Problem solving guide Fluff Problem Possible cause Remedy There is a build upLaundry is not suffi Ciently dryProblem Possible cause Remedy Drying process Even switches offGoes on too long or Programme again Tons or Minimum Iron programme. If the drum isTo change the interior drum lamp After sales service PC indicator lamp Interface for service techniciansRepairs Front view InstallationInstallation Transporting the machine to its installation siteAligning the machine Installation site Replacing the lidWasher-dryer stack Electrical connection Procedure Installation ventingGeneral AvoidCalculating the effective duct length To calculate the effective duct lengthInternal duct diameter Calculation example At the rearLeft or right side of the machine Venting system with Flexible ducting hose Venting systems overviewInstallation examples venting sys- tem with flexible hose Example Venting system with plastic pipingConnecting directly to a wall vent Main venting duct Height of venting outlet for washer dryer stack Washer dryer stackCottons Consumption dataTechnical data Programmable functions for changing standard settings Programmable functions Is switched onIncreased drying level in the Cottons programmes To checkIncreased drying level in the Minimum Iron programmes Buzzer
Top Page Image Contents