Miele T 220 Control panel, Programme selector, Programme sequence and check lamps Start button

Page 9

Control panel

aProgramme selector

The programme selector can be turned clockwise or anti-clockwise.

bProgramme sequence and check lamps

cSTART button

Press the Start button to start a programme.

The Start indicator lamp will flash as soon as a programme can be started. It lights up constantly once the programme has started.

dI-On/0-Off button

To switch the appliance on or off / to interrupt a programme.

eDoor button

to open the door / to cancel a programme.

Pressing this button will open the door even when the appliance is switched off at the mains.

If the appliance is switched on at the mains and the door is opened the drum lighting will come on. It will go out a few minutes later to save en- ergy.

9

Image 9

Contents Operating instructions for vented tumble dryer T Contents Consumption data Technical data Correct use Technical safetyOperation Page Using accessories Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsProgramme selector Control panelProgramme sequence and check lamps Start button Door buttonWash care labels Tips on dryingProgrammes Fabric type Special notes Low temperatureNormal+ NormalMinimum Iron Programme chartSmoothing Hand careWarm air Cool airHow to dry correctly Load the drum Switch on the dryerPrepare the laundry Start the programme Select a programmeAt the end of a programme To cancel a programmeSelecting a different programme Interrupting a programmeCleaning and care Cleaning the fluff filterTumble dryer Problem solving guide Fluff Problem Possible cause Remedy There is a build upLaundry is not suffi Ciently dryProblem Possible cause Remedy Drying process Even switches offGoes on too long or Programme again Tons or Minimum Iron programme. If the drum isTo change the interior drum lamp After sales service PC indicator lamp Interface for service techniciansRepairs Front view InstallationInstallation Transporting the machine to its installation siteAligning the machine Installation site Replacing the lidWasher-dryer stack Electrical connection Procedure Installation ventingGeneral AvoidCalculating the effective duct length To calculate the effective duct lengthInternal duct diameter Calculation example At the rearLeft or right side of the machine Venting system with Flexible ducting hose Venting systems overviewInstallation examples venting sys- tem with flexible hose Example Venting system with plastic pipingConnecting directly to a wall vent Main venting duct Height of venting outlet for washer dryer stack Washer dryer stackCottons Consumption dataTechnical data Programmable functions for changing standard settings Programmable functions Is switched onIncreased drying level in the Cottons programmes To checkIncreased drying level in the Minimum Iron programmes Buzzer