Installation
Installation
Transporting the machine to its installation site
When moving the machine you can hold it by the lid where it protrudes to the rear of the dryer. To manoeuvre the dryer out of its packing case to its in- stallation site you will also need to hold it by the front feet.
Aligning the machine
The machine must be perfectly level to ensure safe and proper operation.
^The screw feet can be adjusted to compensate for any unevenness in the floor.
A ventilation gap of at least 10 mm must be maintained between the bottom of the machine and the floor. It must not be blocked by deep pile carpets, plinths, etc, which would prevent a sufficient intake of cold air.
25