Installation - venting
Connecting directly to a wall vent
The best method of venting the dryer is to connect it directly to the outside wall of a room. However, it is neces- sary to insert the wall vent right through the wall.
Because the vented air is blown di- rectly outside, and has only a short distance to go, this system is very ef- ficient in terms of time and energy consumption.
^A wall pipe and a flexible foam gas- ket must be used (both Miele optional accessories).
ABefore drilling into the wall . . .
. . . read the installation instructions supplied with the Miele wall pipe.
. . . and study the following dia- grams.
View from above:
1.Wall pipe
2.Flexible foam gasket
Side view:
1.Wall pipe
2.Flexible foam gasket
BInsert the ring adapter (1) into the wall pipe.
CFit the foam gasket (3) on to the con- necting piece (2) on the wall pipe and push the dryer up against the wall.
34