Miele T 220 operating instructions Increased drying level in the Minimum Iron programmes

Page 41

Programmable functions

Increased drying level in the MINIMUM IRON programmes

The machine is designed to dry us- ing as little energy as possible. How- ever, if you require the laundry to be drier, it is possible to reduce the final moisture level in the MINIMUM IRON programmes. Note that programme durations will be longer if this option is activated.

The machine is supplied ex-works with this option switched off. It can be acti- vated is wished.

Follow steps A to G to programme and store in memory.

The programmable functions are acti- vated with the help of the START button and the programme selector.

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

The programme selector is at Finish.

APress the START button and keep it pressed in whilst carrying out steps B to C.

BSwitch the dryer on with the I-On /0-Offbutton.

CWait until the START indicator lamp comes on . . .

D. . . and then release the START but- ton.

ETurn the programme selector to the COTTONS Low Temperature posi- tion.

If the Drying indicator lamp is not flashing, the increased drying level is deactivated.

If the Drying indicator lamp is flash- ing, the increased drying level is ac- tivated.

FPressing the START button switches between activating and deactivating increased drying.

GSwitch the machine off with the I-On /0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

To check:

^Carry out steps A to E.

If the indicator lamp for Drying flashes = Increased drying level

is switched on

is not on = Increased drying level is switched off

^Switch off the dryer. The check is complete.

41

Image 41
Contents Operating instructions for vented tumble dryer T Contents Consumption data Technical data Correct use Technical safetyOperation Page Using accessories Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tipsProgramme selector Control panelProgramme sequence and check lamps Start button Door buttonWash care labels Tips on dryingProgrammes Fabric type Special notes Low temperatureNormal+ NormalMinimum Iron Programme chartSmoothing Hand careWarm air Cool airPrepare the laundry How to dry correctlyLoad the drum Switch on the dryer Start the programme Select a programmeAt the end of a programme To cancel a programmeSelecting a different programme Interrupting a programmeTumble dryer Cleaning and careCleaning the fluff filter Problem solving guide Fluff Problem Possible cause Remedy There is a build upLaundry is not suffi Ciently dryGoes on too long or Problem Possible cause Remedy Drying processEven switches off Programme again Tons or Minimum Iron programme. If the drum isTo change the interior drum lamp Repairs After sales servicePC indicator lamp Interface for service technicians Front view InstallationAligning the machine InstallationTransporting the machine to its installation site Washer-dryer stack Installation siteReplacing the lid Electrical connection Procedure Installation ventingGeneral AvoidInternal duct diameter Calculating the effective duct lengthTo calculate the effective duct length Left or right side of the machine Calculation exampleAt the rear Venting system with Flexible ducting hose Venting systems overviewInstallation examples venting sys- tem with flexible hose Example Venting system with plastic pipingConnecting directly to a wall vent Main venting duct Height of venting outlet for washer dryer stack Washer dryer stackCottons Consumption dataTechnical data Programmable functions for changing standard settings Programmable functions Is switched onIncreased drying level in the Cottons programmes To checkIncreased drying level in the Minimum Iron programmes Buzzer