Miele T 220 operating instructions Correct use, Technical safety

Page 4

Warning and Safety instructions

Read the operating instructions carefully before using this appliance for the first time. They contain impor- tant information about the safety, use and maintenance of the appliance. This way you will avoid the risk of accidents and damage to the appli- ance.

Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner of the machine.

Correct use

The tumble dryer is only intended for drying fabrics which have been

washed in a water solution, marked on the manufacturer’s wash care label as being suitable for tumble drying.

Any other applications may be danger- ous. The manufacturer is not liable for damage resulting from improper use or operation.

Technical safety

Before setting up the machine check it for any externally visible

damage. Do not install or use a dam- aged machine.

Before connecting the machine, ensure that the connection data on

the data plate (fusing, voltage and fre- quency) matches the mains electricity supply. If in any doubt, consult a quali- fied electrician.

The electrical safety of this ma- chine can only be guaranteed

when continuity is complete between

the appliance and an effective earthing system which complies with local and national regulations. It is most important that this basic safety requirement is regularly tested by a qualified electri- cian. The manufacturer cannot be held responsible for the consequences of an inadequate earthing system (e.g. elec- tric shock).

Do not connect the machine to the mains electricity supply by an ex-

tension lead. Extension leads do not guarantee the required safety of the machine (e.g. danger or overheating).

The machine is built in accordance with current safety requirements.

Unauthorised repairs could result in un- foreseen dangers for the user, for which the manufacturer cannot accept re- sponsibility. Repairs should only be un- dertaken by a Miele approved engi- neer.

Ensure current is not supplied to the appliance while maintenance or repair work is being carried out.

Faulty components must only be exchanged for Miele original spare

parts. Only when these parts are fitted can the safety standards of the ma- chine be guaranteed.

If the appliance is supplied from a cord extension set or electrical por-

table outlet device the cord extension set or electrical portable outlet device should be positioned so it is not subject to splashing or ingress of moisture.

4

Image 4
Contents Operating instructions for vented tumble dryer T Contents Consumption data Technical data Technical safety Correct useOperation Page Using accessories Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsControl panel Programme selectorProgramme sequence and check lamps Start button Door buttonTips on drying Wash care labelsLow temperature Programmes Fabric type Special notesNormal+ NormalProgramme chart Minimum IronHand care SmoothingWarm air Cool airLoad the drum Switch on the dryer How to dry correctlyPrepare the laundry Select a programme Start the programmeTo cancel a programme At the end of a programmeSelecting a different programme Interrupting a programmeCleaning the fluff filter Cleaning and careTumble dryer Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not suffi Ciently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Tons or Minimum Iron programme. If the drum is Programme againTo change the interior drum lamp PC indicator lamp Interface for service technicians After sales serviceRepairs Installation Front viewTransporting the machine to its installation site InstallationAligning the machine Replacing the lid Installation siteWasher-dryer stack Electrical connection Installation venting ProcedureGeneral AvoidTo calculate the effective duct length Calculating the effective duct lengthInternal duct diameter At the rear Calculation exampleLeft or right side of the machine Venting systems overview Venting system with Flexible ducting hoseInstallation examples venting sys- tem with flexible hose Venting system with plastic piping ExampleConnecting directly to a wall vent Main venting duct Washer dryer stack Height of venting outlet for washer dryer stackConsumption data CottonsTechnical data Programmable functions for changing standard settings Is switched on Programmable functionsIncreased drying level in the Cottons programmes To checkIncreased drying level in the Minimum Iron programmes Buzzer