Installation
Electrical connection
This tumble dryer is supplied ready for connection to an a.c. single phase sup- ply. The machine is supplied with a 2 m long mains cable with moulded plug.
The appliance should be connected up only by a qualified electrician, in accor- dance with national and local safety regulations.
For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA.
The voltage, rated load and plug rating are given on the data plate. Please en- sure that these match the household mains supply.
Important
The wires in the mains lead are col- oured in accordance with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
As the colours of the wires in the mains lead of this appliance may not corre- spond with the coloured markings iden- tifying the terminals in your plug, pro- ceed as follows:
The wire which is coloured green and yellow must be connected to the termi- nal in the plug which is marked with the letter E or by the earth symbol z or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter A or coloured red.
WARNING
THIS APPLIANCE MUST BE
EARTHED
27