Miele T 220 Programmable functions, Increased drying level in the Cottons programmes, To check

Page 40

Programmable functions

Increased drying level in the COTTONS programmes

The machine is designed to dry us- ing as little energy as possible. How- ever, if you require the laundry to be drier, it is possible to reduce the final moisture level in the COTTONS programmes. Note that programme durations will be longer if this option is activated.

The machine is supplied ex-works with this option switched off. It can be acti- vated is wished.

Follow steps A to G to programme and store in memory.

The programmable functions are acti- vated with the help of the START button and the programme selector.

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

The programme selector is at Finish.

APress the START button and keep it pressed in whilst carrying out steps B to C.

BSwitch the dryer on with the I-On /0-Offbutton.

CWait until the START indicator lamp comes on . . .

D. . . and then release the START but- ton.

ETurn the programme selector to the COTTONS Normal position.

If the Drying indicator lamp is not flashing, the increased drying level is deactivated.

If the Drying indicator lamp is flash- ing, the increased drying level is ac- tivated.

FPressing the START button switches between activating and deactivating increased drying.

GSwitch the machine off with the I-On /0-Offbutton.

The setting you have selected is now stored in memory. You can change it again at any time.

To check:

^Carry out steps A to E.

If the indicator lamp for Drying flashes = Increased drying level

is switched on

is not on = Increased drying level is switched off

^Switch off the dryer. The check is complete.

40

Image 40
Contents Operating instructions for vented tumble dryer T Contents Consumption data Technical data Technical safety Correct useOperation Page Using accessories Caring for the environment Disposal of the packing materialDisposal of your old appliance Energy saving tipsControl panel Programme selectorProgramme sequence and check lamps Start button Door buttonTips on drying Wash care labelsLow temperature Programmes Fabric type Special notesNormal+ NormalProgramme chart Minimum IronHand care SmoothingWarm air Cool airLoad the drum Switch on the dryer How to dry correctlyPrepare the laundry Select a programme Start the programmeTo cancel a programme At the end of a programmeSelecting a different programme Interrupting a programmeCleaning the fluff filter Cleaning and careTumble dryer Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not suffi Ciently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Tons or Minimum Iron programme. If the drum is Programme againTo change the interior drum lamp PC indicator lamp Interface for service technicians After sales serviceRepairs Installation Front viewTransporting the machine to its installation site InstallationAligning the machine Replacing the lid Installation siteWasher-dryer stack Electrical connection Installation venting ProcedureGeneral AvoidTo calculate the effective duct length Calculating the effective duct lengthInternal duct diameter At the rear Calculation exampleLeft or right side of the machine Venting systems overview Venting system with Flexible ducting hoseInstallation examples venting sys- tem with flexible hose Venting system with plastic piping ExampleConnecting directly to a wall vent Main venting duct Washer dryer stack Height of venting outlet for washer dryer stackConsumption data CottonsTechnical data Programmable functions for changing standard settings Is switched on Programmable functionsIncreased drying level in the Cottons programmes To checkIncreased drying level in the Minimum Iron programmes Buzzer