開始洗衣前（續）, 檢測洗衣量和水位顯示, How to put laundry

Before Using Your Machine (continued)

開始洗衣前（續）

How to put laundry in

衣物的放入方法

Put in the laundry as	Put bulky or ﬂoating laundry in basket ﬁrst.		The jeans and other thick clothes should be evenly dis-
evenly as possible.	大件衣物或易浮起的衣物應先放入洗衣槽。		tributed in the washing basket before washing. (Prevent
盡可能均勻地放入待洗			the laundry from overﬂowing during washing)
衣物。			將牛仔褲等厚布料衣物均勻地放入洗衣槽內再進行清
			洗。（防止脫水時衣物溢出）
			• Press the laundry with hand during
	Jean	Sheet	water supply, and make the water
	牛仔褲	床單	inﬁ ltrate the cloth sufﬁ ciently.
	• It smoothes rotation of the laundry.		供水時用手壓住衣物，讓水充分滲入
	有利於衣物的良好旋轉。		布料。
	• Splash of water must be prevented.		• Splash of water must be prevented.
	防止水滴飛濺。		防止水滴飛濺。

Checking Amount of Laundry and Displaying Water Level

檢測洗衣量和水位顯示

Checking amount of laundry

洗衣量的檢測

Select the program required for washing after putting in the laundry, and press the “START” button.The sensors begin to detect the weight of washing, displaying the water level correspondently. (The detection is not included in the processes of “DELICATE”, “BLANKET”, “WOOL”, “SPEEDY”, “TUB CLEAN”, “TUB DRY”.)

放入衣物後選擇洗衣所需程序，按下「啟動」按鈕，傳感器開始檢測衣物重量，並顯示水位。（「絲柔」、「被毯」、「毛絨」、「快速」、「筒清洗」、「筒風乾」程序不執行該功能。）

1Put the laundry in, turn the power ON, choose the appropriate program, and press the “START” button.

放入衣物，按下電源開關按鈕。選擇洗衣所需程序，按下「啟動」按鈕。

•The fulsator rotates with absence of water to check the washing load

(no damage to clothes)

葉輪在無水狀態下旋轉，檢測洗衣量。（不會損傷衣物）

2 Display the correspondent to washing load water level.

顯示與洗衣量相應的水位。

The remaining time displays "---" during washing load detection and returns to the display after detection is completed.

检测结

换显

时间

Checking washing load

Display Water Level

3 Put the detergent in ( 19~20) 放入洗衣劑。（ 19~20）

•Put in detergent, fabric softener,

bleach, and close the lid.

放入洗衣劑、柔軟劑、漂白劑後，請關閉洗衣機機蓋。

•After the display of the detergent amount and water level, please add in detergent in one minute, and close the lid, otherwise it will give alarm. (at that time, if the "WATER LEVEL" button is pressed, the washing

machine will not wait any more and start rotating)

顯示洗衣劑量和水位後，請在1分鐘內放入洗衣劑，並關閉機蓋，否則將響起警報。（此時若按下“水位”按鈕，則洗衣機不再等待而立即開始旋轉）

•After the washing basket is ﬁlled with water or begins operating, to replenish detergent, please

thrown it into the basket directly.

洗衣槽中有水或運轉開始後，如要增加洗衣劑，請將洗衣劑直接倒入洗衣槽中。

Before Using Your Machine (continued)