Changing Pre-Set Options
End of Cycle Beeps
The beeps signaling the end of the cycle can be increased or decreased.
1.Enter the Option Adjustment Mode.
2.Use the WASH OPTION button to select the number of beeps you prefer.
3.Press POWER to store your selection.
EN
Number of Beeps
Light on
TIME SAVER | = | 15 beeps |
SOAK | = | 5 beeps |
|
|
|
SOFTENER RINSE | = | no beeps |
|
|
|
Default Rinse Option
The normal rinse on the Regular and Heavy Duty cycles is a Shower Rinse. When you select Softener Rinse on these cycles the rinse changes to the default rinse. The default rinse is the rinse option used on the Wool, Delicate and Permanent Press cycles. The default rinse is a spray rinse followed by a deep rinse. However you can change the default rinse to two deep rinses.
Rinse Option
Light on | 1st rinse | 2nd rinse |
MED spin | deep | deep |
| rinse | rinse |
|
|
|
SLOW spin | – | – |
|
|
|
HOLD | spray | deep |
| rinse | rinse |
1.Enter the Option Adjustment Mode.
2.Use the SPIN SPEED buttons to select the rinse option you prefer.
3.Press POWER to store your selection.
Volume of Water used in the Shower Rinse (Regular cycle)
You can increase or decrease the volume of water added during the shower rinse on the Regular cycle.
1.Enter the Option Adjustment Mode.
2.Use the WATER LEVEL buttons to select the volume of water you wish to be used in the shower rinse.
3.Press POWER to store your selection.
Shower Rinse Volume
Light on
HIGH | = | more water |
MED | = | more water |
|
|
|
LOW | = | FACTORY SETTING |
Controlled Cold
Ecosmart is designed for installations that have both hot and cold water. To ensure optimum performance even in very cold weather, the cold water temperature is controlled to 60˚F. However if for some reason you do not have hot water available you may need to change to uncontrolled cold in very cold weather.
Controlled Cold Options
Light color
green | = | controlled cold |
amber | = | uncontrolled cold |
|
|
|
Ecosmart leaves the factory with the Controlled Cold Option set. You can change this by entering the Option Adjustment mode and by pressing the ADVANCE button once.
29