Changing Pre-Set Options
Out of Balance Recovery Routine
When your Ecosmart is spinning it can sense if the wash load is out of balance and will stop and
Automatic Recovery Option:
Your Ecosmart will try to automatically correct the out of balance load. It will fill with water and agitate to redistribute the load before trying to spin up again.
Out of Balance Recovery Options
Regular
Light on | = | automatic recovery |
Light off | = | machine stops |
|
|
|
Machine Stops Option:
Your Ecosmart will stop, giving a short burst of beeps every five seconds and the RINSE or SPIN light will flash. You must redistribute the load more evenly yourself. (Use this option if you wish to conserve water.)
1.Enter the Option Adjustment Mode.
2.Use the REGULAR button to select the Out of Balance Recovery Option you prefer.
3.Press Power to store your selection.
Auto Water Fill Level
If you are not satisfied with the level that your Ecosmart fills to on AUTO WATER LEVEL, you can alter the fill level that Auto will select.
If you feel there is too much water, you can decrease the fill level that will be selected.
1.Enter the Option Adjustment Mode.
2.Use the CYCLE buttons to decrease the amount of water selected.
3.Press POWER to store your selection.
Auto Water Level Adjustment
Light on
FAVOURITE | = | less water |
PERM. PRESS | = | less water |
|
|
|
WOOL | = | less water |
|
|
|
DELICATE | = | less water |
|
|
|
HEAVY DUTY | = | factory setting |
|
|
|
If you feel that there is not enough water for the load, we recommend that you check by pausing the machine and pushing the clothes down to see how much spare water is at the bottom of the wash basket. Clothes often float and your Ecosmart can sense the water under the clothes. Failing this, you might like to select a higher water level manually.
28