Fisher & Paykel GWL11 installation instructions Inlet Hoses, Leveling the Washer

Installation Instructions

Step 4

Inlet Hoses

1.Install hoses with the straight end (with filters) fitted to the faucets.

2.Install elbow ends onto washing machine (inlet valves are marked on the back of the machine H=hot, C=cold)

Note: If there is a cold water supply only, an inlet valve cap (available from Fisher & Paykel) MUST be connected to the hot valve. The cap prevents water leaking from the hot valve.

1. Faucet	2. Washer
end of	end of
hose	hose

Step 5

Leveling the Washer

1.Insert the four rubber leveling feet inserts into the feet on the base of the washer. (See diagram 1).

2.Move the washer into its final position. We suggest a minimum clearance of 1” (25mm) on each side for ease of installation. (See diagram 2).

3.Turn on water and check hose connections for leaks. Check that there are no kinks in the hoses.

4.It is IMPORTANT to level the washer to ensure proper performance during spin.

Adjustable feet

Rubber insert

Diagram 1

1” (25mm) 1” (25mm)

Diagram 2

Adjust the feet by unscrewing/screwing to make sure the washer is level and cannot rock.

5.Use the walls and adjacent counter tops as a sight guide to check to see if washer appears level. Readjust the feet if necessary.

6.Open the lid and check the washer basket to see that it sits slightly forward of centre. (See diagram 3).

IncorrectCorrect

adjustmentadjustment

Diagram 3

8