Fisher & Paykel WL37T26D Changing pre-set options, Option Adjustment mode

28

Changing pre-set options

Option Adjustment mode

After using your AquaSmart™ you may want to fine tune some of the options to suit your wash needs.

There are a number of preset options, which can be altered.

The rinse option.

Changing the cold wash to Controlled Cold.

The number of beeps at the end of the cycle.

The Out of Balance recovery routine.

Resetting the washer back to the settings it left the factory with.

To enter Option Adjustment mode

1Turn machine on at the wall but do not press POWER.

Press START/PAUSE and hold down, then press POWER.

You will hear two quick beeps and the machine will show an unusual pattern of lights. Pages 29–31 explain the different options in more detail.

2Use the buttons on the panel to make your changes to the pre- set options.

3Press POWER to return to normal mode.

4Your AquaSmart™ will automatically remember your changes.

Fig.16 Press START/PAUSE and hold down, then press POWER.