Caring for your AquaSmart™ washer 33
Cleaning the inside of your washer
It is important that you occasionally clean the inside of yourEN washer. Your AquaSmart™ has a self cleaning cycle specifically
for this purpose. We recommend that you use the CLEAN ME cycle 5 – 6 times a year and suggest that you do not wash clothes during this cycle.
1Add approximately 2 scoops of a powdered detergent that contain phosphate directly into the detergent dispenser.
2Turn your machine on.
3Press and hold the HIGH EFFICIENCY and START buttons together.
4Your AquaSmart™ will automatically start an AUTO CLEAN cycle that incorporates a full tub of hot water and a one hour soak to ensure that your washer is thoroughly cleaned.
Cleaning your low profile agitator
If your low profile agitator becomes stained we recommend you use household bleach to clean it. Ensure you wear gloves, tip a small amount of household bleach onto a soft cloth and apply to the stain. Be careful to avoid metal surfaces of your washer. Leave it to soak in for 10 minutes and repeat. Then put your AquaSmart™ washer through the CLEAN ME cycle to remove any residual bleach (refer above).
Automatic lint disposal system
With AquaSmart™ there is no need to remove messy lint filters. Your AquaSmart™ has a self cleaning lint disposal system. It automatically separates the lint from the wash water as it washes. The lint becomes trapped between the inner tub and outer basket and is flushed out at the end of the wash.
Diaper sanitizers/bleach
Diaper sanitizers and bleach are very corrosive to metal surfaces. DO NOT use your AquaSmart™ to soak items in bleach or sanitizer, or tip the contents of the diaper bucket into your washer. Rinse and wring items out thoroughly before placing them in the washer.