
16
The unique AquaSmart™ wash
The AquaSmart™ washer has two modes of washing, High Efficiency and Conventional. Both modes start the same way, with a Detergent Activating wash.
Detergent Activating wash |
|
AquaSmart™ fills the tub at the selected water temperature, with |
|
just enough water so the clothes are saturated. This small amount |
|
of sudsy water flows through the clothes, up a specially designed |
|
portal and back onto the clothes in a waterfall effect. This |
|
thoroughly dissolves and activates the detergent. | Fig.10 Detergent Activating wash |
High Efficiency mode |
|
In the High Efficiency mode the AquaSmart™ then fills with just |
|
enough water to lift the clothes off the low profile agitator so when |
|
it rotates, the clothes gently roll over each other. This wash uses |
|
similar quantities of water to most Front Loaders and so, not only |
|
do you get the benefits of water savings but the higher detergent |
|
concentrations give you optimum soil removal. | Fig.11 High Efficiency wash |
|
Conventional mode |
|
The Conventional mode is the immersion wash all Top Loader users |
|
are familiar with. After the Detergent Activating wash the AquaSmart™ |
|
fills with cooler water until the clothes are submerged, and gently |
|
turns the clothes over. We recommend this mode when the dilution |
|
effect of water can solve or prevent common wash problems. For |
|
example, when dye or color run can be a problem, or when washing |
|
sandy towels. The SHEETS cycle uses the Conventional mode. | Fig.12 Conventional wash |
|
Some cycles can be used in both modes, whilst others work in only one.
Regular
Heavy
Delicate
Sheets
Whites
Bulky
Easy Iron
High Efficiency | Conventional |
| – |
–
–
–
These two wash modes mean that your AquaSmart™ washer gives you the best of both worlds, to suit any laundry situation.