Powdered detergent: Put the SEPARATOR in the back position, behind the guides, as shown following. There will be a gap between the bottom of the wash cycle detergent compartment and the bottom of the separator.
LIOUI
SC
Separator in back position, behind guides
!.Separator
2. Guide
NOTE: The separator will be in the powder (back) position when shipped from the factory.
Bleach compartment
(Number 5 in Dispenser Illustration)
Add NO MORE THAN 1/3cup (80 mL) liquid chlorine bleach to this compartment. The bleach will be automatically diluted and dispensed at the best time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.
•Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not guess.
•Do not fill beyond the "MAX" level. Overfilling could cause severe garment damage.
Fabric Softener compartment (Number 6 in Dispenser Illustration)
Add 1/4cup (60 mL) liquid fabric softener to this compartment. Fabric softener will be automatically dispensed in the final rinse.
•Do not fill beyond the "MAX" level.
Dss @ s@
1.To pause the washer at any time, select PAUSE/CANCEL.
2.To continue the cycle, select and hold START (for approximately 1 second).
Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before START is selected.
Options and Modifiers can be changed anytime after START is selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle
1.Select PAUSE/CANCEL twice.
2.Select desired cycle.
3.Select the desired OPTIONS.
4.Select and hold START (for approximately I second) to restart the washer at the beginning of the new cycle.
To cancel a cycle
1.Select PAUSE/CANCEL twice.
2.The washer powers down, the door unlocks, and clothes can be removed.
NOTE: If the water level or the temperature is too high, the washer will drain automatically before the door unlocks.
To change Options or Modifiers after the cycle has started
1.Select PAUSE/CANCEL.
2.Select the desired OPTIONS or MODIFIERS.
3.Select and hold START (for approximately 1 second) to continue the cycle.
To drain the washer manually
f.Select PAUSE/CANCEL.
2.Select DRAIN/SPIN.
3.Select and hold START (for approximately 1 second) to begin the drain.
4.When the spin is complete, the door unlocks. Items can be removed from the washer.
THese lights show which portion of the cycle the washer is operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
STATUS
ADD A GARMENT ®
SOAK / PREWASH•
WASH @
RINSE•
SPINO
CLOTHESCLEAN ®
CONTROLLOCKED0
Adding items
You can add items to the washer after the cycle has started for Express Wash, Normal/Casual, Heavy Duty, Whitest Whites, and Sanitary if the ADD A GARMENT status light is glowing.
13