Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from dryer.
Place dryer at least 18 inches (46 cm) above the floor for a garage installation.
Failure to do so can result in death, explosion, or fire.
•Is the dryer located in a room with temperature below 45°F (7°0)?
Proper operation of dryer cycles requires temperatures above 45°F (7°C).
•Is the dryer located in a closet?
Closet doors must have ventilation openings at the top and bottom of the door. The front of the dryer requires a minimum of 1" (2.5 cm) of airspace, and, for most installations, the rear of the dryer requires 51/2''(14 cm). See the Installation Instructions,
•Has an air dry modifier been selected?
Select the right temperature for the types of garments being dried. See "Modifiers,"
•Is the load too large and heavy to dry quickly? Separate the load to tumble freely.
Cycle time too short
Excessive Weight Hazard
Use two or more people to move and install dryer.
Failure to do so can result in back or other injury.
•Is the automatic cycle ending early?
The load may not be contacting the sensor strips. Level the dryer.
Change the dryness level setting on Auto Cycles. Increasing or decreasing the dryness level will change the amount of drying time in a cycle.
Do not use a dryer rack with an Auto Cycle.
Lint on load
•Is the lint screen clogged?
Clean lint screen. Check for air movement.
Stains on load or drum
•Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle. Fabric softener sheets added to a partially dried load can stain your garments.
Drum stains are caused by dyes in clothing (usually blue jeans). This will not transfer to other clothing.
Loads are wrinkled
•Was the load removed from dryer at the end of the cycle?
•Was the dryer overloaded? Dry smaller loads that can tumble freely.
Odors
•Have you recently been painting, staining or varnishing in
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone from the area, rewash and dry the clothing.
PROTECTION AGREEMENTS
Master Protection Agreements
Congratulations on making a smart purchase, Your new Kenmore ® product is designed and manufactured for years of dependable operation, But like all products, it may require preventive maintenance or repair from time to time, That's when having a Master Protection Agreement can save you money and aggravation.
Purchase a Master Protection Agreement now and protect yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend the life of your new product. Here'swhat's included in the Agreement:
_/Expert service by our 12,000 professional repair specialists
_/Unlimited service and no charge for parts and labor on all covered repairs
_/Product replacement if your covered product can't be fixed
_/Annual Preventive Maintenance Check at your request - no extra charge
_/Fast help by phone - phone support from a Sears technician on products requiring
_/Power surge protection against electrical damage due to power fluctuations
v' Rental reimbursement if repair of your covered product takes longer than promised
Once you purchase the Agreement, a simple phone call is all that it takes for you to schedule service. You can call anytime day or night, or schedule a service appointment online.
Sears has over 12,000 professional repair specialists, who have access to over 4.5 million quality parts and accessories. That's the kind of professionalism you can count on to help prolong the life of your new purchase for years to come. Purchase your Master Protection Agreement today!
Some limitations and exclusions apply. For prices and additional information, call
Sears Installation Service
For Sears professional installation of home appliances, garage door openers, water heaters, and other major home items, in the U.S.A. call
23