Step 7: Install the Control Unit | 29 |
Step 7: Install the Control Unit
Raymarine produce a range of control units to suit different boats and user requirements.
ST7001+ | The ST6001+ and ST7001+ control units have been designed | |
| specifically to provide access to all advanced functions on the | |
| Type 150, 150G, 400 and 400G course computes. | |
| You can also use the following control units to operate the course | |
| computer autopilot system, but they do not enable access to some of | |
| its more advanced functions: | |
ST6001+ | • | ST6000+ control unit |
| • | ST7000+ control unit |
•ST600R remote control unit
•ST80 autopilot keypad (as part of an ST80 instrument system)
•RayPilot 650 control unit
•ST6000 and ST7000 control units
⊆For full information about control unit functionality, see page 46.
Connecting to the course computer
If your system only includes a single control unit, connect it to one set of SeaTalk terminals on the course computer.
⊆For full information, refer to the control unit owner’s handbook.
If you are connecting more than one control unit or a combination of control
⊆units and SeaTalk instruments/equipment, see page 32 of this handbook. Step 7