Raymarine 150/400 manual Maintenance, Specifications, Glossary Index

iv	Type 150/400 Autopilot System: Installation Guide
	Attaching the sensor to the tiller arm	24
	Checking alignment	25
	Connecting to the course computer	25
	5.2 Linear rudder position sensor - installation	26
	Introduction	26
	Mounting	26
	Step 6: Install the Drive Unit	28
	Step 7: Install the Control Unit	29
	Step 8: Clamp the Cables	30
	Step 9: Integrate the System	31
	9.1 Connecting SeaTalk equipment	32
	Possible systems	32
	9.2 Connecting NMEA equipment	36
	Course computer NMEA inputs/outputs	36
	Control unit NMEA inputs	38
	SeaTalk/NMEA interface	38
	Connecting several items of NMEA equipment	38
	9.3 Connecting optional components	40
	GyroPlus yaw sensor	40
	Handheld remotes	40
	External alarm	40
	Wind vane (sail boats)	40
	Off switch	41
	Other manufacturers’ drive units	41
	9.4 Setting-up the autopilot	42
	Maintenance	43
	Regular checks	43
	Fault-finding	43
	Servicing	43
	EMC, servicing and safety guidelines	44
	Product support	44
	Specifications	45
	Control unit functionality	46
	Glossary	47
	Index	49