Furuno SC-60 manual Programming user beacon stations, Station Nearest, Beacon station display

3. OPERATION

LIST

a)The following display appears after pressing the [ENT] key at step 7.

STATION (NEAREST)

[EXIT]	[USER]
310.0		29.1 nm	92
287.0		56.7 nm	134
292.0		160 nm	320
321.0		234 nm	134
302.0		426 nm	121	*

Beacon station frequency

* = User-registered station

Range and bearing from own ship to beacon station (Reference only)

Beacon station display

b)Choose desired station with the Omnipad.

c)Press the [ENT] key.

8.Press the [DISP] key to close the menu.

3.10.2Programming user beacon stations

The user may program 20 DGPS beacon stations from which to use in selection of DGPS beacon station. Whenever a new station comes into operation, you can add it to the list.

1.Press the [MENU] key to open the menu.

2.Choose DGPS and press the [ENT] key.

3.Choose STATION and press the [ENT] key.

4.Choose LIST and press the [ENT] key.

5.Choose USER and press the [ENT] key to show the STATION (USER) display.

STATION (USER)

[EXIT] [NEW?] [CLR?] 01 02 03 04 05 06

STATION (USER) display

6. Choose “NEW?” and press the [ENT] key.

3-15