Furuno SC-60 manual Navigation data, Interface, NAV OUT menu, Off, Format selection window

3. OPERATION

3.8.2Navigation data

Choose the data to output from the NAV OUT port as follows:

1.Press the [MENU] key.

2.Choose I/O SETUP and press the [ENT] key.

3.Choose “NAV OUT?” and press the [ENT] key.

NAV OUT

VTG : ON

GGA : ON

ZDA : ON

ATT : OFF

GLL : ON

ROT : OFF

NAV OUT menu

VTG: Course over ground and ground speed

GGA: Global positioning system (GPS) fix data

ZDA: Time and date

ATT: True heading, pitching, rolling

GLL: Geographic position (latitude and longitude)

ROT: Rate-of-turn data

	4.	Choose item desired and press the [ENT] key.
		OFF
		ON
	5.	Choose ON or OFF as appropriate and press the [ENT] key.
	6.	Press the [DISP] key to close the menu.
3.8.3	Interface

Normally choose IEC for supplying heading information to AIS and radars. If you are unsure of the version your equipment uses, try all three and choose the one which successfully outputs data.

1.Press the [MENU] key to open the menu.

2.Choose I/O SETUP and press the [ENT] key.

3.Choose NMEA VER and press the [ENT] key.

VER1.5

VER2.0

IEC

Format selection window

4. Choose VER 1.5, VER 2.0 or IEC as appropriate and press the [ENT] key.

3-9