Furuno SC-60 manual Trip Menu, Resetting Distance Run, Trip menu, Reset Distance prompt

3. OPERATION

3.12TRIP Menu

The TRIP menu chooses the indication to show on the Speed display, distance source; resets distance run (see para. 3.13) and smooths the tide drift indication.

1.Press the [MENU] key to display the main menu.

2.Choose TRIP MENU and press the [ENT] key.

TRIP MENU

DISTANCE DISP : DSTNC

DISTANCE CALC: GPS

RESET DISTANCE?

DRIFT AVG : 10SEC

TRIP menu

1.Choose DISTANCE DISP and press the [ENT] key.

2.Choose what to display on the Speed display; distance run (DSTNC) or tide direction and speed (DRIFT). Press the [ENT] key.

3.Choose DISTANCE CALC and press the [ENT] key.

4.Choose the source for distance run; GPS, VLW (distance traveled through water) or VBW (Dual ground/water speed). (VLW requires DS-80 type Doppler speed log and VBW requires Current indicator or Doppler speed log.) Press the [ENT] key.

5.Choose DRIFT AVG. and press the [ENT] key.

6.If tide current and speed data is unstable, enter a smoothing figure to stabilize the data. The higher the figure the more smoothed the data. A setting between 0 (no smoothing) and 9999 is available.

7.Press the [ENT] key.

8.Press the [DISP] key to close the menu.

3.13Resetting Distance Run

The distance run may be reset to zero as below when the source of distance run is GPS or VBW.

1.Press the [MENU] key to display the main menu.

2.Choose TRIP MENU and press the [ENT] key.

3.Choose RESET DISTANCE and press the [ENT] key.

RESET DISTANCE?

ARE YOU SURE?

YES NO

RESET DISTANCE prompt

4.Choose YES and press the [ENT] key.

5.Press the [DISP] key to close the menu.

3-19