Furuno SC-60 manual Input/Output Ports, Port Label Connector Signal Remarks Type

APPENDIX A

Input/Output Ports

Port Label	Connector	I/O	Signal			Remarks
	Type
HDG OUT1	MJ6	O	Heading	1) IEC 61162		(NMEA 0183) or AD-10 format (hardware)
HDG OUT2	MJ6	O	Heading	2) IEC 61162		(NMEA 0183) Ver.1.5 2.0 (software)
HDG OUT3	MJ6	O	Heading	3) Talker: GP
				4)	Speed: 4800 bps
				5)	IEC 61162 sentences: HDM, HDT, ROT, VTG,
					ZDA, GGA (VTG, ZDA, and GGA are factory-set to
					OFF.)
				6)	IEC 61162	(NMEA 0183) sentence output
					interval: HDM, HDT, ROT: 0.1 sec and others:
					1 sec
				7) AD-10 output interval: 25 ms
				8)	Signal level: IEC 61162
				Heading data selected in the HDG SETUP menu is
				output.
HDG OUT4	DSUB9	O	Heading	1) IEC 61162		(NMEA 0183) only
				2)	Signal level: RS-232C
				3)	Used for program upgrade
NAV OUT1	MJ6	O	Speed,	1) IEC 61162		(NMEA 0183) Ver.1.5 or 2.0 (software)
(IEC 61162)			course,	2) Talker: GP
			position,	3) Speed: 4800 bps
NAV OUT2	DSUB9
			and time
(RS-232C)				4)	IEC 61162	(NMEA 0183) sentences: VTG, GGA,
					GLL, ROT, ZDA (on/off by menu)
				5)	IEC 61162	(NMEA 0183) sentence output interval:
					1 sec
				6) ATT sentence
					Proprietary sentence or FURUNO sentence
					Only P sentence: output rate of 0.1 sec
					Accompanied with any of above sentences:
						output rate of 0.2 sec
				ATT sentence – True heading, pitching, rolling
				$PFEC, Gpatt, xxx.x, +xx.x, +xx.x<CR><LF>
				(Ver.1.5)
				$PFEC, Gpatt, xxx.x, +xx.x, +xx.x*hh<CR><LF>
				(Ver.2.0)
				7)	Signal level:
				NAV OUT1: IEC 61162; NAV OUT2: RS-232C

A-10