3. OPERATION
NEW USER CHANNEL
FREQ | : | 310.0kHz |
RATE | : 200BPS | |
LAT | : 37˚59’N | |
LON | : 133˚00’E | |
EXIT? | SAVE? | |
NEW USER CHANNEL display
Note: For steps
◄or ►; change value with ▲ or ▼.
7.Press the [ENT] key, enter frequency of the station, and press the [ENT] key.
8.Press the [ENT] key, enter baud rate of the station, and press the [ENT] key.
9.Press the [ENT] key, enter latitude of the station, and press the [ENT] key.
10.Press the [ENT] key, enter longitude of the station, and press the [ENT] key.
11.Choose “SAVE?” and press the [ENT] key.
12.Press the [DISP] key to close the menu.
3.10.3Editing user beacon stations
1.Press the [MENU] key to open the menu.
2.Choose DGPS and press the [ENT] key.
3.Choose STATION and press the [ENT] key.
4.Choose LIST and press the [ENT] key.
5.Choose USER and press the [ENT] key.
6.Choose a station from the list and press the [ENT] key. The display looks something like the one below.
FREQ | : |
| 310.0kHz |
RATE | : 200BPS | ||
LAT | : 37˚59’N | ||
LON | : | 133˚00’E | |
EXIT SAVE? |
| ERASE? | |
Display for editing user channels
7.Choose item, press the [ENT] key, edit data, and press the [ENT] key.
8.Choose “SAVE?” and press the [ENT] key.
9.Press the [MENU] key twice to finish.