Kenwood TS-590S instruction manual Fsk Rev/ Fm/Am, Set

23(5$725&219(1,(1&(6

Operation	Announcement
Carrier level adjustment	“Carrier” + Setting value1
AGC constant time AGC	“Fast” + Setting value1
setting (FAST)
AGC constant time AGC	“Slow” + Setting value1
setting (SLOW)
While in Menu mode	“Menu” + Menu number +
	Setting value1

1During continuous operation, only the setting value is announced.

Status Settings using VOICE1

	Status	Announcement
Press [	]	“VFO” + (“S” +)1 “A/B” +
While in VFO mode		Frequency
Press [A/B (A=B)]		(“S” +)1 “A/B” +
Changing VFO A or B
		Frequency
while in VFO mode
		• Announces when
(TF-SET ON/OFF is
		Menu No. 09 is ON
stored)
Press [1.8] ~ [50] or
[GENE]
Press [LSB/USB]/ [CW/
FSK (REV)]/ [FM/AM		Frequency
(FM-N)]		• Announces when
Changing the frequency		Menu No. 09 is ON
while in VFO mode
Changing the mode
while in VFO mode
Press [M/V]		“Channel” + Channel
While in Memory channel		number + (“S” +)1
mode		Frequency
Turn the MULTI/CH
control
Changing the memory		Channel number +
channel while in Memory		(“S” +)1 Frequency
channel mode		• Announces when
Changing the mode		Menu No. 09 is ON
while in Memory channel
mode
Hold or Release [TF-		(“S” +)1 Frequency
SET]
		• Announces when
TF-SET ON/OFF while in
Memory scroll mode		Menu No. 09 is ON
Press [Q-MR]		“Quick memory” +
		Channel number +
While in Quick memory
		(“S” +)1 “A/B” +
mode		Frequency
Turn the MULTI/CH		Channel number +
control		(“S” +)1 “A/B” +
Changing the memory		Frequency
channel while in Quick		• Announces when
memory mode		Menu No. 09 is ON

	Status		Announcement
			Empty Channel:
Press [M.IN]			“Memory in” + Channel
			number + “Blank”
While in Memory scroll
			Stored Channel:
mode
			Channel number +
			(“S” +)1 Frequency
			Empty Channel:
Turn the MULTI/CH			Channel number +
			“Blank”
control
			Stored Channel:
Changing the channel
			Channel number +
number while in Memory
			(“S” +)1 Frequency
scroll mode			• Announces when
			Menu No. 09 is ON
Press [ENT]
While in frequency/			“Enter”
memory channel number
entry mode
Press [ENT], then
press the number keys
Enter the number while			Entered number
in frequency/ memory
channel number entry
mode
Press [ENT], then turn
the MULTI/CH control
Displaying the frequency			Frequency
history while in
Frequency entry mode
Press the number keys
Enter the number while			“Enter” + Entered
in memory scroll channel			number
number entry mode
Press [ENT] + [		]	“Auto” + Channel
			number + Frequency
While in Auto setting
			• Announces when
mode
			Menu No. 09 is ON
Turn the MULTI/CH			Channel number +
control
			Frequency
Changing the channel
			• Announces when
number while in Auto
			Menu No. 09 is ON
setting mode
Press the number keys			Frequency
Changing the frequency/			• Announces when
mode while in Auto			Menu No. 09 is ON
setting mode
Press and hold [FINE]			“Frequency lock” +
Turning the frequency
			“On”/“Off”
lock ON/OFF
Press [FM/AM (FM-N)]			CTS/RTS Output Mode:
+ [	]
			“CTSRTS on”
Changing the output
			PSQ/PKS Output Mode:
signal for the PC control
			“PSQPKS on”
terminal 2

61