23(5$725&219(1,(1&(6
(;7(51$/$8',26(77,1*6
Q 6HOHFWLQJD'DWD7UDQVPLVVLRQ/LQH
Depending on how you connect your transceiver to a PC, you will need to set a data transmission line type. Access Menu No. 63 and select “ACC2” (default) or “USB”.
Q $XGLR/HYHO6HWWLQJV
You can set the input and output audio levels of an ACC2 connection via Menu Nos. 66 and 67, and the input and output audio levels of a USB connection via Menu Nos. 64 and 65. Each setting has a range of 0 to 9, with a default setting of 4.
Additionally, you can mix beep tones, the sidetone, and the Voice guide for an ACC2/USB audio output by accessing Menu No. 68 and selecting “on” (whereby the PC will confirm the sounds being output from the transceiver speaker).
&+$1*,1*7+(6,*1$/)257+(&207(50,1$/
Send the PSQ (SQL control signal) and PKS signal through the COM terminal.
1Turn the transceiver power OFF.
2Press [FM/AM (FM-N)] + [].
•“PSQ/PKS” momentarily appears, and the RTS/CTS signal is replaced with the PSQ/PKS signal at the COM terminal.
3Repeat steps 1 and 2 to return to normal operation.
• “CTS/RTS” momentarily appears.
The operation of the output signal for each setting is as follows:
| COM Terminal | PC | |
| TxD | RxD | |
CTS/ | RxD | TxD | |
RTS | CTS | ||
RTS | |||
CTS | RTS | ||
| |||
| GND | GND | |
| TxD (stopped) | RxD | |
PSQ/ | RxD (stopped) | TxD | |
PSQ | CTS | ||
PKS | |||
PKS | RTS | ||
| |||
| GND | GND |
Normal PC commands (ARCP, ARHP, or SKY COMMAND) will not work when this function is turned ON.
•When operating the
software misdetects a busy signal, set Menu No. 76 to “OPEN”.
•When not using the USB terminal, besides a serial cable, create and connect a sound input/output cable. In this case when connecting to sound equipment and the audio output level is too high, change the level setting in Menu No. 66.
•After changing this setting via the menu, turn the power OFF and then back ON to implement the change.
&21752//,1*7+(766)520$3&
If a PC and the
http://www.kenwood.com/i/products/info/amateur/software _download.html
The detailed remote controlling instructions are available in accompanied documents and help file.
5(027(/<&21752//,1*7+(766217+( 1(7:25.
In addition to the
Note: The
237,21$/9*692,&(*8,'( 6725$*(81,7
The optional
At the same time, if you are using CTCSS, set Menu No 75 to “2” and confirm that the frequency is not already in use and is not causing any interference.
For information on how to install the
•When turning the power OFF and the VoIP
58