Vector VEC054D owner manual Safety Guidelines / Definitions, Volts Minimum Gage for Cord Sets

Page 2

90548011 VEC054D INVERTER.qxp 3/6/09 10:41 AM Page 1

SAFETY GUIDELINES / DEFINITIONS

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.

RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and property damage. There are certain applications for which tools and equipment are designed. Black & Decker strongly recommends that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all warnings and operating instructions before using any tool or equipment.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

READ ALL INSTRUCTIONS

WARNING: Read all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.

AVOID DANGEROUS ENVIRONMENTS. Don’t use inverter in damp or wet locations. Don’t use inverter in the rain.

KEEP CHILDREN AWAY. All visitors should be kept at a distance from work area.

STORE IDLE INVERTERS INDOORS. When not in use, inverter should be stored indoors in dry, and high or locked-up place – out of reach of children.

DON’T FORCE APPLIANCE. It will do the job better and with less likelihood of a risk of injury at the rating for which it was designed. Don’t overload inverter.

USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT. Use safety goggles or safety glasses with side shields, complying with applicable safety standards and, when needed, a face shield. Also use face or dust mask if operation is dusty. This applies to all persons in the work area. Also use a hard hat, hearing protection, gloves, safety shoes and dust collection systems when specified or required. Safety glasses or the like are available at extra cost at your local dealer or Black & Decker Service Center.

DON’T ABUSE CABLE. Never carry inverter by cable or yank it to disconnect from receptacle. Keep cable from heat, oil, and sharp edges.

DON’T OVERREACH. Keep proper footing and balance at all times.

DISCONNECT APPLIANCES. Disconnect the appliance from the inverter when not in use.

AVOID UNINTENTIONAL STARTING. Turn inverter off when not in use.

PROPER COOLING is essential when operating the inverter. Do not place the unit near the vehicle’s heat vent or in direct sunlight. Do not restrict air flow around inverter.

USE OF ACCESSORIES AND ATTACHMENTS. The use of any accessory or attachment not recommended for use with this inverter could be hazardous. Note: Refer to the accessory section of this manual for further details.

STAY ALERT. Watch what you are doing. Use common sense.

CHECK FOR DAMAGED PARTS. Ensure all cables, insulation and connectors are in good operating condition.

DO NOT OPERATE inverter and appliances near flammable liquids or in gaseous or explosive atmospheres. Motors in these tools normally spark, and the sparks might ignite fumes.

EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. The accompanying table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Volts

 

Minimum Gage for Cord Sets

 

 

 

Total Length of Cord in Feet

 

120V

 

0-25

26-50

51-100

101-150

 

 

 

(0-7,6m)

(7,6-15,2m)

(15,2-30,4m)

(30,4-45,7m)

240V

 

0-50

51-100

101-200

201-300

Ampere Rating

(0-15,2m)

(15,2-30,4m)

(30,4-60,9m)

(60,9-91,4m)

 

 

 

 

More

Not more

 

American Wire Gage

 

Than

Than

 

 

 

 

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10 -

12

16

16

14

12

12 -

16

14

12

Not Recommended

 

 

 

 

 

 

 

1

Image 2
Contents Maxx Ssttm VEC054DSafety Guidelines / Definitions Volts Minimum Gage for Cord SetsImportant Safety Instructions Important Cable InformationFront View Diagram Back View Diagram FeaturesMaxx SST Features IntroductionPrinciple of Operation Power Inverter Output WaveformAppliance Power Consumption 120VAC Appliance Consumption in Amps and Watts ChartAppliance AMPS@ WATTS@ 880Operating Instructions Power Source RequirementsDetermining Battery Size RuntimeBattery Operating Times Protective FeaturesInstallation Operating Environment Installation ProceduresTemporary Installation Connection To Load Permanent Installation#2AWG power source cables must not exceed 6 feet in length Operating TipsProblem Solution TroubleshootingCommon Audio/Visual Problems Care and Maintenance Fault Protection and Troubleshooting GuideResetting the Unit Fuse Replacement Preventive MaintenanceAccessories SpecificationsYear Limited Warranty Program Compact DE 2000 W Lignes Directrices EN Matière DE SÉCURITÉ/DÉFINITIONS Directives DE Sécurité Importantes Avertissement Pour Réduire LE Risque D’INCENDIERenseignements Importants SUR LE Câble Conserver CES DirectivesCaractéristiques Avertissement Pour Réduire LE Risque DE BlessuresPrincipe DE Fonctionnement Commandes et fonctionsCaractéristiques du Maxx SST Forme d’onde de sortie du convertisseur continu-alternatifConsommation Énergétique DES Appareils Électriques Produits incompatibles120 V C.A AppareilPuissance À Détermination de la taille de la batterie FonctionnementExigences relatives à la source d’alimentation Durée de fonctionnementCaractéristiques de sécurité Durées de fonctionnement des batteriesEnvironnement d’exploitation Mode d’installationInstallation temporaire Installation permanente Connexion à la charge Conseils d’utilisationProblèmes audiovisuels communs Problème SolutionDépannage Guide de protection contre les défaillances et de dépannageRéenclenchement des circuits de l’appareil Remplacement de fusibleAccessoires RangementLa liberté de la Puissance Programme DE Garantie Restreinte DE Deux ANSCordless,MAXXRechargeableSST Normas DE SEGURIDAD/DEFINICIONES No conecte al cableado de distribución de CA Instrucciones Importantes Sobre SeguridadAdvertencia Para Reducir EL Riesgo DE Descarga Eléctrica Advertencia Para Reducir EL Riesgo DE IncendioCaracterísticas Conserve Estas InstruccionesIntroducción Controles y funcionesLa forma de onda de salida del conversor eléctrico Características de Maxx SSTPrincipio DE Operación Comparación de onda senoidal modificada y onda senoidalConsumo DE Energía DE LOS Artefactos ATENCIÓN. Para Reducir EL Riesgo DE Daños a LA PropiedadRequisitos de la fuente de energía Cuadro DEL Consumo EN Amperios Y Vatios DE ArtefactosInstrucciones DE Operación ArtefactoCómo determinar el tamaño de la batería Tiempo de funcionamientoTiempos de funcionamiento de la batería Características de protecciónInstalación Instalación temporaria Entorno de operaciónProcedimientos de instalación Diagrama de configuración de baterías permanentes Instalación permanenteNota sobre el uso del control remoto se vende por separado Conexión a la cargaSugerencias de operación Guía de protección de fallas y detección de problemas Detección DE ProblemasProblemas visuales/de audio frecuentes Problema SoluciónReemplazo de fusibles Reinicio de la unidadAlmacenamiento Mantenimiento preventivoLa libertad de la Energía Cat No. VEC054D Form No MAR
Related manuals
Manual 2 pages 33.99 Kb