Axis Communications YP3040 manual Setup

YP3040 Installation Guide Page 9

Network camera

Network cable

(Ethernet RJ-45 to camera)

PTZ control cable (RS-485 to camera)

Power supply cable

(24 V AC from mains adaptor)

Mains adaptor

ENGLISH

Setup

When you install a compatible Axis network camera on the YP3040 Pan-Tilt Motor, the controls will be available from the Live View page in the camera’s web pages after enabling the PTZ functionality in Setup tools. Follow these instructions to enable PTZ functionality in the camera:

1.Go to Setup > System Options > Ports & Devices > COM Port in the camera’s web pages, and set Usage to Pan Tilt.

2.Refer to the User’s Manual supplied with your product for instructions on how to configure the PTZ settings.