Furuno FSV-30S installation manual Transceiver Unit, Grounding the Equipment, Transceiver unit

1.4 Transceiver Unit

The physical distance between the hull unit and the transceiver unit should be no more than 5 m. The transceiver unit should be mounted on a mounting base (shipyard supply) whose dimensions are as shown in the outline drawing of the transceiver unit at the back of this manual. Reinforce the transceiver unit against vibration by stays extending from the eyebolts on the top of the unit. Fasten four bolts (M12, local supply) at the bottom of the transceiver unit to fix the unit to the mounting location.

CHARGE

BV ERR

OV ERR

FUSE

Transceiver unit

1.5 Grounding the Equipment

Transceiver unit, junction box: Use copper strap (supplied).

Processor unit:Use a ground wire (IV-8SQ).

Junction box for hull unit: Use the wing bolt on the junction box.

1-12