Furuno FSV-30 Installing the Attachment Flange option, Attachment flange Type OP10-27, Code no

1.6 Installing the Attachment Flange (option)

The attachment flange permits use of the tank for the CSH-20 series using the 1200 mm stroke transducer.

Attachment flange Type: OP10-27, Code no: 000-067-050)

Name	Type	Code No.	Qty	Remarks
Attachment flange	10-077-5802	100-303-610	1
O-ring	CO 0318A (V585)	000-166-370-10	1
Hex. nut	M20 SUS304	000-863-116	48
Flat washer	M20 SUS304	000-864-136	24
Spring washer	M20 SUS304	000-864-270	24

Procedure

1.Clean the hull unit flange, O-ring and O-ring groove. Coat them with a slight amount of grease.

2.Use 48 hex. nuts, flat washers and spring washers to fasten the attachment flange to retraction tank.

3.Place the O-ring in position on the attachment flange.

To install the attachment flange and the hull unit, see paragraph 1.1.4.

Hex. Bolt

Flat Washer

Hull Unit Flange

O-ring

Flat Washer

Spring Washer

Hex. Nut

Attachment Flange

O-ring

Existing Tank

Flat Washer

Spring Washer

Hex. Nut

Attachment flange for 1200 mm stroke transducer, sectional view

1-13