Furuno FSV-30S installation manual Input Voltage and Fuses, Input voltage, Marking the label

2.6 Input Voltage and Fuses

The transceiver unit is shipped from the factory with its input voltage set for 230 VAC and a 10 A fuse inserted in F601 and F602. For other voltages, change toggle switch positions and fuses as below.

Input voltage

Set the toggle switches S603, S604 and S605 according to input voltage, referring to the table below.

Input	S603	S604	S605	Default setting
(TB-B101)
100 V	L	L	L
110 V	H	L	L
115 V	H	H	L
220 V	H	L	H
230 V	H	H	H	Default setting

Fuses

Change the fuse in F601 and F602 according to input voltage, referring to the table below.

Input		Fuse	Default
(TB-B101)	F601	F602	setting
100 V
110 V	20A	20A
115 V
220 V	10A	10A	Default
230 V			setting

WARNING

Use the proper fuse.

Use of a wrong fuse can result in damage to the equipment or cause fire.

Marking the label

After setting toggle switches and changing the fuses, mark the voltage which applies on the label on the inside of the cover. In the example shown right, 100 V is marked so 20A fuses must be used.

FUSE	FUSE
F601	F602
INPUT	FUSE
(TB-B101)	F601	F602
100V
110V	20A	20A
115V
220V	10A	10A
230V

2-18