Furuno FSV-30S installation manual Other System Menu Items, Interface Setting menu

3.4 Other SYSTEM Menu Items

This section mainly shows you how to set up according to external equipment connected. Default settings are underlined.

3.4.1 INTERFACE SETTING menu

MENU	QUIT
INTERFACE SETTING	QUIT

NMEA 1 BAUD RATE: 4800 bps

NMEA 2 BAUD RATE: 4800 bps

CIF BAUD RATE	: 4800 bps
AUX BAUD RATE	: 19200 bps
EXT KP INPUT	: DISABLE
EXT KP OUTPUT	: NEGATIVE

INTERFACE SETTING menu

NMEA 1 BAUD RATE

Set the transmission rate for the NMEA 1 port. (4800 bps, 9600 bps, 19200 bps, 38400 bps)

NMEA 2 BAUD RATE

Set the transmission rate for the NMEA 2 port. (4800 bps, 9600 bps, 19200 bps, 38400 bps)

CIF BAUD RATE

Set the transmission rate for the CIF port. If the CS-120A is connected, choose “2400 bps”. (2400 bps, 4800 bps, 9600 bps, 19200 bps)

AUX BAUD RATE

Set the transmission rate for the AUX port. (2400 bps, 4800 bps, 9600 bps, 19200 bps)

EXT KP INPUT

Set the input logic of KP from an external equipment. (DISABLE, POSITIVE, NEGATIVE) DISABLE: No use external KP.

POSITIVE: Synchronize with leading edge of input pulse.

NEGATIVE: Synchronize with trailing edge of input pulse

Note: To transmit with external KP, set the TX INTERNAL to “0” in the H-SCAN SETTING menu.

EXT KP OUTPUT

Choose the KP output logic, POSITIVE or NEGATIVE. (POSITIVE, NEGATIVE)

3-9