Furuno CH300 manual Setting for Satellite Compass, System setting 1 menu

3. ADJUSTMENT

3.5Setting for Satellite Compass

FURUNO Satellite Compass SC-50/110 can be connected to feed rolling/pitching data to this equipment. Connect the SC-50/110 sensor to the NMEA/SATELLITE COMPASS port, and set up this port as below.

1.Press the MENU key to show the menu.

2.Press ► to select SYS at the top of menu display.

3.Press ▼ to select GO TO SYS MENU.

4.Press ◄ to select YES to display the system menu.

5.Press ▼ to select SYSTEM SETTING.

**SYSTEM SETTING 1 **

MENU		1	2
POSITION	:
		SHIP'S L/L				SHIP'S LOP		CURSOR L/L
TRACK		OFF		ON
CURRENT DATA	:	OFF	FLOW FROM				FLOW TO
HEADING INDICATION :		TRUE	AZ
NORTH MARK	:	OFF	ON
CSE DATA	:	NAV	GYRO
NAV DATA	:	GPS	LoranC			LoranA	DR DECCA OTHERS
NAV2 BAUDRATE	:	4800	9600			19200	38400
TVG CORRECTION	:	OFF	1/2			1/1
UNIT	: m		ft			fa	HIRO	P/B
TEMP	:	C			F
TARGET L/L	:	OFF	ON
CUSTOM KEY	:
		PRESET KEY	SHORT-CUT KEY
ETA MARK	:	OFF	10sec			30sec	1min	3min 6min
: SELECT	: CHANGE		MENU: END

System setting 1 menu

6.Press ▼ to select NAV 2 BAUDRATE, and then press ► to select 38400.

7.Press ▲ to select MENU at the top of the menu, and then press ► to select 2.

3-6