Furuno CH300 manual Transceiver Unit, Transceiver unit

1. MOUNTING

1.3Transceiver Unit

1.3.1General mounting considerations

•The mounting location should be well ventilated and dry.

•The unit can be mounted on a bulkhead or the deck.

•The maximum cable length between the transceiver unit and the raise/lower drive unit is 50 m.

•The maximum cable length between the transceiver unit and the monitor (interface) unit is 10 m.

•Keep the transceiver unit out of splash.

1.3.2Mounting method

Fasten the transceiver unit with four self-tapping screws (5X20, local supplied). For bulkhead mounting, do as follows:

1.Tighten upper self-tapping screws so there is 5 mm clearance between bottom of screw head and bulkhead.

2.Hook the transceiver unit on the upper screws.

3.Tighten the upper screws followed by the lower screws.

475

428

4- 6

FIXING HOLES

LED

340 296.5+1

16.5

455+1

82

Transceiver unit

1-7